Instructions*

1. Download the file named “21-06_LESS-Demo-Box-GUI.zip“.
2. After downloading, unzip the file. You should see the following elements:
   1. Installer.zip
   2. LESS Programmable Demo Kit.exe
3. First, you need to follow these steps:
   1. Unzip the “Installer.zip“. Click on the “Installer” folder and execute the “LESS Programmable Demo Kit Installer.exe” in it.
   2. Choose the location on your computer where you want to install the software.
   3. Click “Next” to start the installation process, which should take approximately 5 minutes. You don’t need to restart the PC at the End.
4. Once the installation is complete, you can launch the LESS Programmable Demo Kit by clicking on “LESS Programmable Demo Kit.exe” (see 2.2.)
5. If you encounter the following error message: “No module found” please do the following:
   1. Connect the Box Pro to your PC using the provided USB cable.
   2. Ensure that the Box Pro is also connected to an electrical outlet. If not, you will see the following error: “No optical feedback. Please make sure that the power is connected to the power socket.”
   3. Click on “Retry“.
6. The light should switch on after a successful connection.
7. Now, you can adjust the light intensity and choose the PWM Frequency, make the desired changes in the demo kit software. The changes will be automatically saved.
8. To turn off the light, unplug the device from the power outlet.
9. When you unplug, this popup will show: “Connection lost”.

*Please note that the software is designed and optimized exclusively for Windows operating systems and is not compatible with any other operating systems, such as macOS, Linux, or mobile platforms.